Ice cream contains many nutrients. With the recipes provided, all should be able to enjoy some type of this tempting food. If the regular recipe does not suit your needs, there is the low calorie recipe which contains less than 3% fat for both a cost and calorie saving. The recipe using coffee whitener is significantly less costly than the regular and does not contain milk fat should that be your limitation. So let's mix up a batch of ice cream for anyone and everyone to enjoy!
Ingredients UsedThe main constituents of ice cream are fat, milk solids-not-fat (skim-milk powder), sugar, gelatin (or other suitable stabilizer), egg and flavouring.
A variety of milk products can be used: cream, whole milk, condensed milk and instant skim-milk powder. The recipes stated below proved satisfactory using whipping cream (32-35% fat), table cream (18% fat) and whole milk. The fat gives the product richness, smoothness and flavour. Skim-milk powder is used to increase the solids content of the ice cream and give it more body. It is also an important source of protein which will improve the ice cream nutritionally. Use good quality, fresh powder to avoid imparting a stale flavour to the ice cream.
Liquid coffee whitener (usually purchased frozen) is a cream substitute in one of the recipes. It will yield a slightly different flavour which is still very acceptable. The texture of the ice cream is very creamy. Liquid coffee whitener offers the convenience of being stored frozen in your freezer and is readily available if a quick decision is made to make ice cream.
Sugar is a common ingredient to use as a sweetener. It increases the palatability and improves the body and texture.
The next ingredient, gelatin (or similar substance) assists in absorbing some of the free water in the ice cream mix and helps prevent the formation of large crystals in the ice cream.
It also gives substance or a less watery taste when the ice cream is consumed. The eggs are added to make the fat and water more miscible and also to improve the whipping ability which gives the ice cream greater resistance to melting.
Although vanilla is the flavour added to all of the mixes listed below, you may add flavours to suit you taste.
Preparation of the Ice Cream MixThe mix (unfrozen ice cream) has to be cooked (pasteurized). For pasteurizing the mix, it is best to use a double boiler to prevent scorching.
Place the liquid ingredients (milk, cream or coffee whitener) in the upper section of the double boiler. Beat in the eggs and the skim-milk powder. Mix the gelatin with the sugar and add to the liquid with constant mixing. While stirring, heat to about 70oC. Place the container in cold water and cool as rapidly as possible to below 18oC.
Aging the MixThe ice cream mix is best if it is aged (stored in the refrigerator) overnight. This improves the whipping qualities of the mix and the body and texture of the ice cream. If time does not permit overnight aging, let the mix stand in the refrigerator for at least four hours. After the aging process is completed, remove the mix from the refrigerator and stir in the flavouring.
Freezing the MixThe freezing procedure has a two-fold purpose, the removal of heat from the mix and the incorporation of air into the mix. Heat is removed by conduction through the metal to the salt water brine surrounding the freezing can. This transfer of heat depends upon the temperature of the brine, the speed of the dasher and how well the dasher scrapes the cold mix from the surface of the freezer can. The dasher speed and surface contact are important to achieve complete removal of the frozen ice cream from the wall of the freezer can. A brine made from 500 grams (1 lb.) of salt and 5 kilograms (11 lbs.) of crushed ice (one pail full) makes a good freezing mixture.
Before starting to freeze the ice cream, make sure all parts of the freezer coming in contact with the ice cream are clean and have been scalded. Let the can cool before pouring in the mix. Place the empty can in the freezer bucket and insert the dasher ensuring both the can and the dasher are centred. Pour the cold, aged mix into the freezer can. The can should not be filled over two-thirds full to allow sufficient room for air incorporation.
The recipes listed below will fill a 5 litre (5 quart U.S.) freezer can to just below the fill line. Attach the motor or crank mechanism, depending on whether your freezer is the electric or hand-cranked style, and latch down securely. Plug in the motor or start turning the crank. Immediately begin adding crushed ice around the can sprinkling it generously with salt. Try to add the salt and ice in the same one to ten proportion to get the proper brine temperature. After the bucket is filled with ice to the overflow hole, pour a little water over the ice to aid in the melting process.
Freeze the mix for 20 to 30 minutes. If the electric motor stalls, immediately unplug it. Remove the motor or crank and take the dasher out of the ice cream. The ice cream will be softly frozen. Scrape the ice cream from the dasher and either scoop into suitable containers or pack in the freezer can. Immediately place the ice cream in the deep freeze to harden.
If freezer facilities are not available, the ice cream can be left in the can, the lid plugged with a cork and placed back into the bucket. Repack the freezer with more ice and salt, cover with a heavy towel and set in a cool place to harden until serving time. This will require further addition of ice and salt depending on the length of time the ice cream is being held.